Dieci APOLLO MINI AGRI - Fork Shifter Installation; Fork Shifter Maintenance

9 | Equipment
172 AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM
1Fixedbase
2Forks
3Equipmentfasteninghole
2
3
1
150554-1
NOTICE
The equipment fastening hole located at the forks end can only be used for fastening certain equipment
to the forks. For the fastening procedures refer to the manual of the equipment.
9.7.3 Fork shifter installation
NOTICE
For the fork shifter installation, refer to the chapter "Equipment installation".
9.7.4 Fork shifter maintenance
NOTICE
For the fork spreader maintenance, refer to the chapter "Forks check".
Theforkspreaderrequiresmaintenance(fig.1505551).
– Useonlysiliconeoiltolubricatethechromeplatedcylinders
"1".
– Usegreasetolubricatetherailsforslidingbetweenthefixed
baseandthetranslatingsupport"2".
1
2
150555-1
WARNING
Do not use grease to lubricate the movable hydraulic parts or chrome plated cylinders.
Use only silicone oil and clean them frequently.