Equipment | 9
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 161
Dieciforkscode
..................
Manufacturer's Logo/
Abbreviation
..................
ManufactureDate/Batch
..................
Maximumcapacity(Kg)
..................
Load application center of
gravity(mm)*
..................
*Theremaybemorethanonevaluedependingontheload.
9.6.2 Description
The forks (fig. 1505191) consist of the following main
components:
1. Forks
2. Eyelet
3. Equipmentfasteninghole
150519-1
WARNING
The equipment fastening hole located at the forks end can only be used for fastening certain equipment
to the forks. For the fastening procedures refer to the manual of the equipment.