Dieci APOLLO MINI AGRI - Page 83

Components description | 8
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 83
8.1.14.3 Seat belts
WARNING
Always fasten the seat belts when operating the machine.
The machine is equipped with a cab that can withstand the weight of the machine in the event of rollover
(ROPS), it is therefore necessary that the operator remains tied to the seat by the seat belt not to be swept
out and possibly crushed.
Beforestartingthevehicle,carefullyexaminethestraps,bucklesandfasteningdevicestothestructure.Ifsome
componentisdamagedorworn,replacetheseatbeltorthecomponentbeforeoperatingthevehicle.
Remainseatedwiththeseatbeltsfastenedproperlyforallthetimeofoperationofthevehicletoreducethe
riskofinjuryincaseofaccident.
Followinganaccidentofacertainimportance,replacetheseatbelts,eveniftheydonotappeardamaged.
To fasten the seat belt is necessary to:
1. Insertthelatchplate“1”inthebuckle“2”.
1504161
1. Make sure of that the hooking occurred, and then adjust
thebeltaroundthebody.
2. Thebeltisconsideredproperlyconnectedwhenitisclose
tothebody
1504162