Dieci APOLLO MINI AGRI - Page 169

Equipment | 9
AXH1230‐UK ﴾ENG﴿ ‐ Apollo KM 169
9.6.7.5 Positioning a load in a high position
1. Bringtheloadinthetransportpositioninfrontofthestack.
2. Liftandextendtheboomtotaketheloadabovethestack.If
necessary,move themachine towardsthe stackveryslowly
and very carefully. If necessary, use the inching pedal to
approachslowly.
3. Pressthebrakepedalandmovethegearselectorinneutral.
4. Placetheloadhorizontallyandlayitonthestack,lowerand
retracttheextensionstoproperlypositiontheload.
5. Release the forks alternately retracting the extensions and
liftingtheboom;ifpossiblemakethevehiclemovebackvery
slowlyandverycarefully.
150530-1