Digi XBee 3 ZigBee - Digi Xbee 3 Zigbee RF Module

Digi XBee® 3 Zigbee® RF Module
This manual describes the operation of the XBee 3 Zigbee RF Module, which consists of Zigbee
firmware loaded onto XBee 3 hardware.
The XBee 3 Zigbee RF Modules provide wireless connectivity to end-point devices in Zigbee mesh
networks. Using the Zigbee 3.0 feature set, these devices are inter-operable with other Zigbee
devices, including devices from other vendors. With theXBee 3 Zigbee RF Module, users can have their
Zigbee network up-and-running in a matter of minutes without configuration or additional
development.
For information about XBee 3 hardware, see the XBee 3 RF Module Hardware Reference Manual.
Applicable firmware and hardware 16
Change the firmware protocol 16
Regulatory information 16
Digi XBee® 3 Zigbee® RF Module
15