Digi XBee 3 ZigBee - Applicable Firmware and Hardware; Change the Firmware Protocol; Regulatory Information

Digi XBee® 3 Zigbee® RF Module Applicable firmware and hardware
Digi XBee® 3 Zigbee® RF Module
16
Applicable firmware and hardware
This manual supports the following firmware:
n v.10xx Zigbee
It supports the following hardware:
n XBee 3
Change the firmware protocol
You can switch the firmware loaded onto the XBee 3 hardware to run any of the following protocols:
n Zigbee
n 802.15.4
n DigiMesh
To change protocols, use the Update firmware feature in XCTU and select the firmware. See the
XCTU User Guide.
Regulatory information
See the Regulatory information section of the XBee 3 RF Module Hardware Reference Manual for the
XBee 3 hardware's regulatory and certification information.