Digi XBee 3 ZigBee - P3 (DIO13;DOUT Configuration); P4 (DIO14;DIN Configuration)

AT commands Serial interfacing commands
Digi XBee® 3 Zigbee® RF Module
204
Parameter Description
4 Digital output, low
5 Digital output, high
6 RS-485 enable, low Tx
7 RS-485 enable, high Tx
Default
1
P3 (DIO13/DOUT Configuration)
Sets or displays the DIO13/DOUT configuration (Micro pin 3/SMT pin 3/TH pin 2).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1 UART DOUT
2 N/A
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1
P4 (DIO14/DIN Configuration)
Sets or displays the DIO14/DIN configuration (Micro pin 4/SMT pin 4/TH pin 3).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1 UART DIN
2 N/A
3 Digital input