Digi XBee 3 ZigBee User Manual

Over-the-air firmware/file system upgrade process for Zigbee 3.0 Image Block response
Digi XBee® 3 Zigbee® RF Module
330
Frame data fields Offset Example Comments
Data
payload
ZCL
frame
header
Frame
control
21 0x01
Transaction
sequence
number
22 0x01
ZCL
payload
Command ID 23 0x03 Image Block Request
Field control 24 0x00
Manufacturer
ID
LSB
25
0x1E
MSB
26
0x10
Image type LSB
27
0x00 0x0000 - OTA/OTB file
0x0100 - OTA file system image
MSB
28
0x00
Firmware
version
LSB
29
0x01
30 0x10
31 0x00
MSB
32
0x00
File Offset LSB
33
0x00 0x0 for the first request.
Offset by multiples of Image Block size. For
example, 0x00000000 for the first request,
0x00000040, 0x00000080 and so on.
34 0x00
35 0x00
LSB
36
0x00
Image Block
Size
37 0x40
Checksum 38 0x2D
Image Block response
The server generates an Image Block response upon receiving an Image Block request command. It
responds with a SUCCESS status on being able to retrieve the data for the client. The server uses the
file offset sent by the client to determine the location of the requested data within the OTA upgrade
image.
If you wish to cancel the update process, send an ABORT (0x95) status.

Digi XBee 3 ZigBee Specifications

General

Brand	Digi
Model	XBee 3 ZigBee
Category	Control Unit
Language	English