Digi XBee 3 ZigBee - D1 (AD1;DIO1;TH_SPI_ATTN Configuration); D2 (DIO2;AD2;TH_SPI_CLK Configuration)

AT commands I/O settings commands
Digi XBee® 3 Zigbee® RF Module
215
Parameter range
0 - 5
Parameter Description
0 Disabled
1 Commissioning Pushbutton
2 ADC
3 Digital input
4 Digital output, low
5 Digital output, high
Default
1
D1 (AD1/DIO1/TH_SPI_ATTN Configuration)
Sets or displays the DIO1/AD1 configuration (Micro pin 30/SMT pin 32/TH pin 19).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5
Parameter Description
0 Disabled
1
SPI_ATTN for the through-hole device
N/A for the surface-mount device
2 ADC
3 Digital input
4 Digital output, low
5 Digital output, high
Default
0
D2 (DIO2/AD2/TH_SPI_CLK Configuration)
Sets or displays the DIO2/AD2 configuration (Micro pin 29/SMT pin 31/TH pin 18).
Parameter range
SMT/MMT: 0, 2 - 5
TH: 0 - 5