Digi XBee 3 ZigBee - BLE Unlock Response Frame - 0 xAC; User Data Relay Output - 0 xAD

Frame descriptions BLE Unlock Response frame - 0xAC
Digi XBee® 3 Zigbee® RF Module
316
Frame data fields Offset Example
64-bit source (remote) address MSB 4 0x00
5 0x13
6 0xA2
7 0x00
8 0x40
9 0x40
10 0x11
11 0x22
Source 16-bit address MSB 12 0x00
LSB 13 0x00
Reserved 14 0x00
Checksum 22 0xF4
BLE Unlock Response frame - 0xAC
Description
The XBee 3 Zigbee RF Module uses BLE Unlock API frame - 0x2C to authenticate a connection on the
Bluetooth interface and unlock the processing of ATcommand frames. This frame is used in
conjunction with the Response (0xAC) frame.
For details, see BLE Unlock API frame - 0x2C.
User Data Relay Output - 0xAD
Description
This frame is emitted when user relay data is received from any of the following interfaces: serial port,
BLE, or MicroPython (internal interface). This frame is used in conjunction with User Data Relay frame
- 0x2D.
Format
The following table provides the contents of the frame. For details on frame structure, see API frame
format.
Field data fields Offset Description
Frame type 3 0xAD User data relay output frame.