Distek 2500 - Page 72

To Next Page

To Previous Page

OperationModel 2500 72

For Baskets

1 With the drive head fully raised, position the Quick Height Adjustment block to BASKETS

(USP 1).

Height adjustment block position for baskets

2 Lower the drive head and turn the knob to lock position. The distance of 25±2 mm

between the blade and the inside bottom of the vessel is set and maintained during the

test.

3 Lower the drive head and turn the knob to lock position. The distance of 25±2 mm

between the blade and the inside bottom of the vessel is set and maintained during the

test.

When using baskets, simply switch the paddle blades for basket adapters and

move the height adjustment setting to Baskets. See Basket Installation.

Other manuals for Distek 2500