OperationModel 2500 87
© 2015-2017 Distek, Inc. All Rights Reserved
infinite RPM is greater than test RPM.
Select Print Report
Yes
if printer is configured (local or
network); otherwise select
N o
. Prints automatically after
each test.
Select Print Apparatus ID -
Yes
as part of report; otherwise
select
N o
.
Select Media Replacement
On
or
Off
. Use to change or add
media during test.
Set the time when to change or add the media during test.
Cancel: Closes the Create New Method screen.
Print: Prints the method, provided a printer is configured.
Delete Sampling Points: Deletes selected sampling point.
To Next Page
Loading...
