72A-2570-01 Rev. K 07/2011 Index-1
Index
A
About command, defined A-9
Added Temporary Static-Discharge Grounds
(screenshot) 3-13
Advanced Setup check box 3-21
Advanced Test Protocol section of Test Details
window 3-21
Analysis tab A-17
antivirus software 3-4
Apparatus Selection Window (screenshot) 3-8,
3-18
Apparatus tab A-19
autotransformer tests, setup B-3
auto-zoom of completed traces 3-10, 3-24
B
best practices for testing transformers 3-14
Blade in Top of Fuse Cover (screenshot) D-2
Browse for Folder Dialog Box (screenshot)
5-9
C
Cable and Lead Connections to the SFRA
Instrument (figure) 3-2
Cable Connections for Shorted-Lead Test
(figure) 3-9
Center Cursors command, defined A-7
clamps, plain copper, photo and part number
1-4
Clear Traces command, defined A-9
cloning a transformer 5-6
Command Window Displaying IP Address
(screenshot) 3-31
communication cables
Ethernet crossover with part number 1-4
USB with part number 1-4
Confirm Installation Window (screenshot) A-3
Connect to Instrument Message (screenshot)
3-3
Connected SFRA Leads (screenshot) 3-13
Connecting Safety Ground to Transformer
(figure) 2-2
consistent testing setup, importance of 3-14
correct shorted-lead response 3-11
Correct Shorted-Lead Response (screenshot)
3-11
CSV files for exported data 5-10
Cursor 1 command, defined A-7
Cursor 2 command, defined A-7
D
data
default storage locations for test results 5-8
managing 5-8
source files, selecting 5-9
transferring between M5300s or PCs 5-12
Data Manager tab 3-4, A-11
De-energized and Disconnected Transformer
(screenshot) 3-12
deleting traces 5-11
DNS suffix for IP address 3-31
Doble Engineering shipping address D-3
To Next Page
