72A-2570-01 Rev. K 07/2011 A-1
A. Software Overview
This appendix explains how to install SFRA 5.2 and the appropriate USB
driver and provides a complete overview of the SFRA 5.2 user interface. It
contains the following sections:
• “Installing SFRA 5.2” on page A-1
• “Manually Install the USB Driver” on page A-5
• “SFRA 5.2 Software Overview” on page A-6
• “Apparatus/Test and Legend Panes” on page A-10
• “Tab Divisions in SFRA” on page A-11
Installing SFRA 5.2
These instructions explain how to install SFRA 5.2 under Windows 7 and
Windows XP. You must have administrator privileges to install under either
operating system.
To install SFRA 5.2:
1. Download the software from the Doble web site or run the installation CD
provided by Doble.
2. Do one of the following:
• Windows 7—Right-click
setup.exe and select Run as administrator.
• Window XP—Double-click
setup.exe.
Note: You can install SFRA 5.2 under Vista by following the steps provided
for Windows 7, but SFRA software is not tested under Vista and
compatibility is not assured.
To Next Page
Loading...
Need help?
General
