Troubleshooting Guide
SmartDate X40 BFSE Version 1.0 Feb 2011
146/286
Start Border
• This setting is the time allowed once the Printhead has moved to the printing position
for the printer to stabilize before it begins to print
• The setting should be set to the lowest value possible to ensure good print quality
Typical Values
Print Speed 100 200 300 400 500 600
Start Border 2 2.5 4.2 5.8 7.3 8.6
Note: Increasing this value will add to the overall cycle time.
Default - 2.0 mm
To Next Page
Loading...
