Installation
SmartDate X40 BFSE Version 1.0 Feb 2011
87/286
Encoder Settings
Changing the encoder settings
Remove the protective cap from
the back of the encoder using a
coin
Turn the rotary switch using a
plastic screwdriver to select
correct setting
Default Setting
Position 2 - 3.05 pulses per mm,
standard (613 pulses/rev)
High Resolution Setting
Position A - 30.5 pulses per
mm, high resolution (6122
pulses/rev)
Replace the protective cap on the
back of the encoder
To Next Page
Loading...
