EasyManua.ls Logo

Dräger Carina

Dräger Carina
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical data
122 Instructions for use Carina SW 3.2n
Ambient conditions
During operation
Temperature 5 to 35 °C (41 to 95 °F)
Ambient pressure 900 to 1100 hPa (13.1 to 16 psi)
From 700 to 900 hPa (10.2 to 13.1 psi), reduced
functionality in terms of maximum flow and pres-
sure delivery
Relative humidity 5 to 95 %, non-condensing
Altitude Max. 3000 m (9842 ft)
During storage and transport
Temperature (up to 1 day) –20 to 60 °C (–4 to 140 °F)
Temperature (up to 1 month) –20 to 55 °C (–4 to 131 °F)
Temperature (up to 3 months) –20 to 35 °C (–4 to 95 °F)
Ambient pressure 500 to 1100 hPa (7.3 to 16 psi)
Relative humidity 5 to 95 %, non-condensing
The ambient conditions may be further restricted,
depending on the accessories used. Observe cor-
responding instructions for use.
Setting values
Ventilation systems Breathing circuit with leakage valve
Breathing circuit with controlled expiratory valve
Ventilation modes VC-SIMV, VC-AC, PC-BIPAP, PC-AC,
SPN-CPAP/PS (VG)
Tidal volume VT
Range 100 to 2000 mL, BTPS
Resolution 10 mL
Positive end-expiratory pressure PEEP
Range 3 to 20 mbar (or hPa or cm H
2O)
Resolution 1 mbar (or hPa or cm H
2O)
Pressure limitation Pmax
Range (leakage valve) 5 to 40 mbar (or hPa or cm H
2O)
Range (expiratory valve) 5 to 50 mbar (or hPa or cm H
2O)
Resolution 1 mbar (or hPa or cm H
2O)

Table of Contents

Related product manuals