Programming
Operating Instructions 581 - 01.0 - 05/201660
List of menu items and sub-menu items
Value Description
Length settings
Cutting length: The cutting length can be adjusted,
depending on the sewing direction, from 6 mm to max.
50
mm.
Eyelet diameter (only for eyelet machines)
Stitch length in the buttonhole seam: Distance from stitch
to stitch within the seam (from 0.5 mm to 2 mm).
Number of stitches in the eyelet (only for eyelet
machines): Number of evenly distributed stitches in the
entire eyelet.
Overlap in the eyelet (only for eyelet machines): Overlap
of seam beginning and seam end.
Thread cutting length: The length of the needle thread and
of the looper thread end can be changed on the 581-112 or
581-312 on the buttonhole underside.
Condensing stitches increase the seam safety at seam
beginning and seam end.
Stitch length of the condensing stitches at seam
beginning: Distance from stitch to stitch within the
condensing at seam beginning.
Stitch length of the condensing stitches at seam end:
Distance from stitch to stitch within the condensing at seam
end.
Number of condensing stitches at seam beginning:
Number of stitches within the condensing at seam beginning.
Number of condensing stitches at seam end: Number of
stitches within the condensing at seam end.
Needle thread tension
To Next Page
Loading...
