DURKOPP ADLER 581 - Buttons

Programming
Operating Instructions 581 - 01.0 - 05/201694
5.10.2 Buttons
In the subitem Buttons you can convert the way in which the
machine buttons function. There are 2 settings here.
Parameters in the Butto
ns subitem
To convert the way in which the buttons function:
6. Select ( p. 69) User co
nfig. in service mode.
7. Press the button.
 Th
e following appears on the display:
Icon Entry Meaning
Possible
value range
Preset value
Buttons
• 1 =
Button 1:
Cl
amping plates
are opened /
closed.
Button 2: The
sewi
ng process
only starts when
the clamping
plates are closed
• 2 =
Button 1:
Cl
amping plates
are opened /
closed.
Button 2: The
sewi
ng process
starts. The
clamping plates
are automatically
closed
1-2 2