Safety
Operating Instructions 581 - 01.0 - 05/2016 9
2 Safety
This chapter contains basic information for your safety. Read the
instructions carefully before setting up or operating the machine.
Make sure to follow the information included in the safety instruc-
tions. Failure to do so can result in serious injury and property
d
amage.
2.1 Basic safety instructions
The machine may only be used as described in these instructions.
The instructions should be available at
the machine's location at
all times.
Work on live components and equipment is prohibited.
Exceptions are defined in the DIN VDE 0105.
For the following work, switch off the machine at the main switch
or disconnect the power plug:
• Replacing the needle or other sewing tools
• Leaving the workstation
• Performing maintenance work and repairs
• Threading
Missing or faulty parts could i
mpair safety and damage the ma-
chine. Only use original parts from the manufacturer.
Transport Use a lifting carriage or forklift to transport the machine. Raise the
machine max.
20 mm and secure it to prevent it from slipping off.
Setup The connecting cable must have a power plug approved in the
relevant country. The power plug may only be assembled to the
power cable by qualified specialists.
Obligations
of the o
perator
Follow the country-specific safety and accident prevention regu-
lations and the legal regulations conce
rning industrial safety and
the protection of the environment.
To Next Page
Loading...
