About these instructions
Operating Instructions 581 - 01.0 - 05/20166
1.2 Representation conventions – symbols and
characters
Various information in these instructions is represented or high-
lighted by the following characters in order to facilitate easy and
quick understanding:
Proper setting
Specifies proper setting.
Disturbances
Specifies the disturbances that can o
ccur from an incorrect setting.
Cover
Specifies which covers must be re
moved in order to access the
components to be set.
Steps to be performed when operating the machine (sewing
an
d equipping)
Steps to be performed for service, maintenance, and
in
stallation
Steps to be performed via the software control panel
The individual steps are numbered:
1. First step
2. Second step
The steps must always be followed in the specified order.
Lists are marked by bullet points.
Result of performing an operation
Change on the machine or on the display/control panel.
Important
Special attention must be paid to
this point when performing a step.
To Next Page
Loading...
