Setup
Operating Instructions 581 - 01.0 - 05/2016 135
7Setup
7.1 Checking the scope of delivery
The scope of delivery depends on your specific order. Check that
the scope of delivery is correct after taking delivery.
7.2 Removing the transport locks
All transport locks must be removed prior to setup.
To remove the transport locks:
1. Remove the lashing straps and wooden blocks from the
• Machine head
• Machine table
• Stand
WARNING
Risk of injury from cutting parts!
Cutting injuries may be sustained.
The machine may only be set up by trained
specialists.
Wear safety gloves and safety shoes.
To Next Page
Loading...
