DURKOPP ADLER 581 - Menu Item Machine Config; Load. Pos

Programming
Operating Instructions 581 - 01.0 - 05/2016 75
5.9 Menu item Machine config
The menu item Machine config allows you to determine the
basic settings for the machine which apply to all programs. In this
menu item, the following subitems are available for selection:
• Load. pos. ( p. 75)
• ZZ range ( p. 77)
• Thread mon. ( p. 79)
• Cut. time ( p. 80)
• E-group ( p. 81)
• Threading mode ( p. 84)
• Operation mode ( p. 85)
• Tension data ( p. 86)
• Multiflex ( p. 88)
5.9.1 Load. pos.
In the subitem Load. pos. you can set the desired loading
position.
Parameters in the Load.
pos. subitem
To set the loading position:
1. Select ( p. 69) Machine
config in service mode.
2. Press the button.
 The following appears on the display:
Icon Entry Meaning
Possible
Value range
Preset value
Load. pos. Loading
position
:
Distance from
the cutting point
0-68 68