Programming
Operating Instructions 581 - 01.0 - 05/2016106
5.11.2 Sewing proc.
In the subitem Sewing proc. you can test the sewing process.
To select the Sewing proc. subitem:
1. Select ( p. 69) Test fu
nctions in service mode.
2. Press the button.
The following appears on the display:
Fig. 62: Sewing proc.
3. Press the button so that Sewing proc. is highlighted
on the display.
WARNING
Risk of injury from sharp and moving parts!
Crushing, cutting or punctures possible.
Do not perform any maintenance or setting works
d
uring testing.
To Next Page
Loading...
