Setup
Operating Instructions 581 - 01.0 - 05/2016140
7.7 Securing the stand
Fig. 88: Securing the stand
To ensure that the stand cannot move unintentionally, you have
the option of securing it.
To secure the stand:
1. Screw both support plates (3) on the nut (2) as far down as
requ
ired to ensure that the machine is firm and secure.
2. Screw the counternut (1) upward.
3. Tighten the counternut (1) slightly.
(1) - Counternut
(2) - Nut
(3) - Support plate
To Next Page
Loading...
