Glossary
Operating Instructions 581 - 01.0 - 05/2016 181
12 Glossary
Term Explanation
Start bartack Secures the start of a seam.
Display Displays information.
Control panel You can:
• call up modes
• read values
• read information and error messages
Is located on the side of the machine.
User level Controls authorization as to which processes can be
p
erformed on the control. There are 4 levels:
• Operator
• Buttonhole programming (P)
• Sequence programming (S)
• Technician (F)
CA Abbreviation shown by the display:
See Cutting mode.
CB Abbreviation shown by the display:
See Cutting mode.
Cursor Marks the current position in the software on the
di
splay.
Speed Refers to the revolutions per minute performed by
t
he sewing motor.
Speed limitation See Reduced speed.
Pressure controller Ensures the correct operating pressure.
Threading mode Mode that can be activated at the push of a button.
Se
rves as a threading aid.
End bartack Secures the end of a seam.
Thread cutter Cuts the thread at the end of a sewing process. It is
loca
ted under the sewing material support.
To Next Page
Loading...
