Programming
Operating Instructions 581 - 01.0 - 05/2016 81
Fig. 50: Cut. time
4. Press the button.
5. Enter the desired value using the arrow buttons.
5.9.5 E-group
You can insert different sewing equipment. In the subitem
E-group yo
u enter the selected sewing equipment.
Parameters in the E-gro
up subitem
To set the sewing equipment:
1. Select ( p. 69) Machine
config in service mode.
2. Press the button.
3. Press the button as often as required until E-group is
highlighted on the display.
Icon Entry Meaning
Possible
value range
Preset value
E-group see following
t
able
To Next Page
Loading...
