Machine description
Operating Instructions 581 - 01.0 - 05/201616
The machine is fitted with a programmable control and a control
panel.
These can define up to 50 different buttonholes.
The buttonholes can be programmed in up to 25 sequences
( p. 47).
A sequence can include a maximum of 9 different buttonholes;
e
ach individual buttonhole within the sequence can be repeated
up to maximum 9 times consecutively.
During sewing, it is possible to switch automatically or manually
b
etween the programmed buttonholes ( p. 58).
3.2 Control panel
The OP5000 control panel is located on the side of the machine
and is connected to the control. Using the control panel, you can
set the functions for the relevant buttonhole.
The control panel comprises:
• Display
• Buttons
To Next Page
Loading...
