Programming
Operating Instructions 581 - 01.0 - 05/2016 97
5. Press the button as often as required until the desired
brightness is achieved.
6. Press the button.
5.10.4 Key tones
In the subitem Key tones you can set the button tones.
Parameters in the Key t
ones subitem
To switch the button tones on:
1. Select ( p. 69) User co
nfig. in service mode.
2. Press the button.
Lan
guage appears on the display.
3. Press the button as often as required until Key t
ones
is highlighted on the display.
4. Press the button.
0 a
ppears on the display.
5. Set the desired peep duration using the arrow buttons.
Icon Entry Meaning
Possible
value range
Preset value
Key click
•0 = Off
• 1-50 = Peep
duration in ms
for every
button press
0-50 0
To Next Page
Loading...
