Programming
Operating Instructions 581 - 01.0 - 05/2016 113
Positions and settings
5.11.3 Events
In the subitem Events you can retrace events.
To select the Events subitem:
1. Select ( p. 69) Test fu
nctions in service mode.
2. Press the button.
3.
Select Events.
4. Press the button.
Th
e following options are available:
• A
ll events
• L
atest events
All events
In the subitem All
events all events that have occurred are
displayed.
An explanation of the error messages is provided on p. 159.
Position Setting
4 Needle bar height
5 Needle guard, left
6 Needle guard, right
7 Spreader, left open
8 Spreader, left closed
9 Spreader, right open
10 Spreader, right closed
To Next Page
Loading...
