Maintenance
Operating Instructions 581 - 01.0 - 05/2016 127
6.3 Servicing the pneumatic system
6.3.1 Setting the operating pressure
Information
The operating pressure is 6.5 bar.
The operating pressure is preset
and cannot be adjusted.
6.3.2 Draining the water condensation
Water condensation accumulates in the water separator (2) of the
pressure controller.
Proper setting
Water condensation must not rise up
to the level of the filter
element (1).
Check the water level in the water separator (2) on a daily basis.
NOTICE
Property damage from excess water!
Excess water can cause damage to the machine.
Drain water as required.
To Next Page
Loading...
