Programming
Operating Instructions 581 - 01.0 - 05/2016 79
5.9.3 Thread mon.
In the subitem Thread mon. the thread monitor for the needle
thread is set.
Parameters in the Threa
d mon. subitem
To set the remaining thread monitor:
1. Select ( p. 69) Machine
config in service mode.
2. Press the button
3
. Press the button as often as required until Thread mon.
is highlighted on the display.
Fig. 49: Thread mon.
Icon Entry Meaning
Possible
value range
Preset value
Thread mon. Number of
sti
tches after
which the sewing
process is
canceled due
to a thread
breakage
0-14 7
To Next Page
Loading...
