Programming
Operating Instructions 581 - 01.0 - 05/201698
5.11 Menu item Test functions
In the menu item Test functions you can perform function
tests on the input and output elements, check the sewing process
and retrace events.
In this menu item, the following subitems are available for selection:
• Multitest ( p. 98)
• Sewing proc. ( p. 106)
• Events ( p. 113)
The subitems have further subitems.
5.11.1 Multitest
In the subitem Multitest you can use the software to test
whether specific elements are functioning. Additional measuring
equipment is not required.
To select the Multitest subitem:
1. Select ( p. 69) Test fu
nctions in service mode.
2. Press the button.
Th
e following appears on the display:
WARNING
Risk of injury from sharp and moving parts!
Crushing, cutting or punctures possible.
Exercise the utmost caution when performing
tests
when the machine is running.
To Next Page
Loading...
