Setup
Operating Instructions 581 - 01.0 - 05/2016138
7.5 Using the ring bolt
Fig. 86: Using the ring bolt
The ring bolt makes it easier for you to lift the machine into the
stand. You can use it e.g. to lift the machine with a suspension
crane or you can also thread a stable rod through the ring bolt and
then have 2 people lift the machine. The ring bolt is in the accessory
pack.
To use the ring bolt:
1. Screw the ring bolt (1) onto the machine.
2. Lift the machine (2) into the stand.
3. When the machine is assembled, unscrew the ring bolt (1)
aga
in.
(1) - Ring bolt (2) - Machine
To Next Page
Loading...
