Programming
Operating Instructions 581 - 01.0 - 05/201658
5.3 Buttonhole programming
The buttonholes are programmed on the P level.
The respective characteristics of the
buttonhole, e.g. buttonhole
length and eye shape, can be set for all bartack forms.
Important
Once you press the button, you can no longer sew!
Important
If you change the bartack form of a buttonhole program, all values
o
f this buttonhole are reset to the preset value.
Information
Not all buttonhole shapes and variants can be sewn with every
subclass or item of sewing equipment.
To program a buttonhole:
1. Press the button.
Th
e setting mode for the individual buttonholes is started.
2. Using the button , navigate to the field Butto
nhole
number ( p. 51).
3. Press the button.
4. Select the desired buttonhole number using the
buttons or .
5. Press the button.
6. Using the buttons or select the bartack form .
7. Press the button.
8. Select the desired bartack using the buttons or .
To Next Page
Loading...
