Rho 1012/1030 G Service
12.7.2 Vacuuming out print head s with vacuum system
Contact with ink!
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allowing ink to come into contact with skin and eyes.
1. Prepare cleaning access point for print head maintenance
(→ Page 131 / Opening/closing cleaning access point).
Fig. 93 Placing silicone tub e on the vacuum h ose.
2. Place a n ew silicone tube on th
e vacuum hose.
Fig. 94 Opening the valve
3. Open valve (1).
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/1030 , Issued 07/2013 137 / 147
To Next Page
Loading...
