Rho 1012/1030 G Service
12.7.3 Vacuuming out print heads with s yringe
Contact with ink!
Health hazard
Wear protective gloves.
Wear safety goggles.
Avoid allowing ink to come into contact with skin and eyes.
1. Prepare cleaning access point for print head maintenance
(→ Page 131 / Opening/closing cleaning access point).
Fig. 96 Placing silicone tube on the tip of the s
yringe
2. Place a new, clean silicone tube (1) on the tip of the syringe.
2004 – 2013 © Durst Phototechnik AG – www.durst-online.com , Rho 1012/1030 , Issued 07/2013 139 / 147
To Next Page
Loading...
