MAINTENANCE, SERVICE AND FAULT FINDING
25364 Issue 8 March 2018 4-47
1083 Only BMP and PCX
supported
The controller only supports BMP and
PCX images. Use a paint program to
convert any other formats to either
BMP or PCX.
1084 Error Reading Image Check if the file exists. It is either
damaged or incompatible with the
controller.
1090 Help file not found Help files are not installed. Refer to the
user documentation instead.
1091 Invalid help screen file The installed help file is damaged.
Contact service technician.
1092 Helptext empty Help files are not installed. Refer to the
user documentation instead.
1093 Helptext tag not
found
Help files are not installed. Refer to the
user documentation instead.
1100 Circular Reference A variable depends on another variable
that in turn depends on the first
variable.
None of the variables can thus be
evaluated.
Check the variables dependencies
1101 Out of range The value typed in at the prompt is out
of the range specified in the variable.
Type in a number within the range, or
modify the design to accept another
range.
1102 Invalid Value The typed in value could not be
interpreted.
1103 Too many characters More characters have been typed in
than are specified by the variable.
Type in fewer characters, or modify the
design to accept more characters.
1104 Only numeric
characters allowed
Only numeric characters are allowed.
Type in a number or modify the design
to support standard text.
1105 Variable Not
Supported
A design is loaded that contains a
variable type that is no longer
supported.
The variable is removed.
Use the original program to salvage the
variable or save the design to
permanently remove the variable.
Error No. Error Text Action
To Next Page
Loading...
