MAINTENANCE, SERVICE AND FAULT FINDING
4-58 25364 Issue 8 March 2018
1438 Command is not
supported by actual
version
An attempt to send data not supported
by the actual version used. Check
capabilities of used version. Upgrade if
required or modify the transmission.
1439 Id not supported for
this array
An attempt to send data not supported
by the actual version used. Check
capabilities of used version. Upgrade if
required or modify the transmission.
1440 Failed to save
command to file
Check data to store.
Check file-access rights.
1441 Failed to read
command from file
Check data to read.
Check file-access rights.
1442 Socket may not be
connected while file
operation
Close any connections and try again.
1443 Error receiving format
specific server
An error was detected in the reception
of data to a serial variable with a
specific input definition.
Check the serial variable and the data
sent by the external device.
1444 Error starting Human
readable network
socket
Try using the standard port 9100 or
another available port.
1500 Not enough memory The printer is out of memory. Printer
needs to be rebooted.
1602 More that one
upgrade found
You have more than one file named
upgrade*zip
1603 Could not load file
information
Could not extract the file information
from the archive. Check for valid
upgrade file.
1604 Could not read
service pack
Could not extract the service pack
information from the archive. Check for
valid upgrade file.
1605 Could not read
platform
Could not read platform information
from the archive. Check for valid
upgrade file.
1606 Upgrade not allowed The upgrade required that an
authorised user has approved the
upgrade. Make sure upgrade is
allowed.
1607 Could not validate
versions
Check for valid upgrade file.
Error No. Error Text Action
To Next Page
Loading...
