4.7.5 Download
Download logged data from the USB memory stick inside the instrument. All data logged by the
instrument to the USB memory stick over the period of time specified will be collected. Due to the slow
connection speed of Bluetooth, this should only be used for relatively short sections of data.
Downloading one days’ worth of 1 minute data is likely to take a couple of minutes.
Options Menu
Generates a filename based on the start and end date/time specified. It saves the
downloaded data in the location specified in preferences and asks to send the saved
comma separated text file (.csv) as an attachment to an email. This file format does not
include the parameter headings, just the values.
Sends an email with the parameter data in the body of the email, formatted as displayed
(this includes the parameter name and the values).
Graphs the data that has been downloaded. The user is prompted to select which
parameters to plot based on the parameters that were being logged (refer to
Figure 107).
Figure 107 – Plot of Downloaded Data
4.7.6 Get Parameters
Download a list of parameters and corresponding values directly from the instrument. This list of
parameters is a snap shot of the current instrument state and is very helpful in diagnosing any
problems with the instrument.
To Next Page
Loading...
