Serinus® 30 User Manual 3.3
3.4.33 Advanced Menu
This menu is accessed via a different method than the other menus. From the Home Screen press the
following keys: ()99(
)
This menu contains technical settings, diagnostics and factory hardware installations. No items in this
menu should be accessed without authorisation and supervision of qualified service personnel.
Figure 75 – Advance Menu Screen
When set to On, new items appear on many different menus.
These fields are for diagnostic and service personnel only.
Default is Off.
Enables the user to edit the next service due date.
Moves the sequence to the next state (e.g. from Fill to Measure).
This command is most commonly used to force an instrument
out of the warm-up sequence early.
Reset to Factory Defaults
Reset the configuration to factory defaults. This will erase all
calibrations and user configuration information.
If a data log becomes corrupted it may be possible to restore It
by rebuilding its index file. This command will ask the user to
specify a month and will rebuild the index for that month. This
operation can take many minutes and it should not be
interrupted. While the file is rebuilding any data logging will be
suspended.
CAUTION
No items in this menu should be accessed without authorization and supervision
of qualified service personnel.
To Next Page
Loading...
