Installation/Decommission
2. Installation/Decommission
2.1 Initial Check
Packaging
The Serinus® 30 is transported in packaging specifically designed to minimise the effects of shock and
vibration during transportation. Ecotech recommends that the packaging be kept if there is a likelihood
that the instrument is going to be relocated.
Note: The red plastic caps that seal the pneumatic connections during transport must be removed
prior to operation.
Items Received
With the delivery of the Serinus 30, user will receive the following:
Table 3 – List of Items Received
Ecotech Serinus 30 analyser
Refer to Figure 22, callout 7.
Green Ecotech Resources USB Stick
Refer to Figure 22, callout 10.
Manual (hardcopy optional)
Refer to Figure 22, callout 9.
Refer to Figure 22, callout 8.
Refer to Figure 22, callout 11.
Refer to Figure 22, callout 12.
Refer to Figure 22, callout 12.
Refer to Figure 22, callout 2.
Refer to Figure 22, callout 1.
Refer to Figure 22, callout 3.
Refer to Figure 22, callout 4.
Refer to Figure 22, callout 5.
Refer to Figure 22, callout 6.
*The power lead received depends on the power supply of the country (120 V or 240 V).
Note: Check that all these items have been delivered undamaged. If any item appears damaged,
contact your supplier before turning the instrument ON.
Note: It is recommended to kept packaging material for transport or storage purpose.
To Next Page
Loading...
