Ecotech Acoem Serinus 30 - Tests Menu; Digital Input Test Menu; Figure 60 - Tests Menu Screen; Figure 61 - Digital Input Test Menu Screen

Operation
Page 75
3.4.18 Tests Menu
Main Menu → Service Menu → Diagnostics Menu → Tests Menu
Figure 60 – Tests Menu Screen
Screen Test
Performs a screen test by drawing lines and images on the
screen so that the operator can determine if there are any
faults in the screen. Press a keypad key to step through the test.
The up and down arrow keys will adjust the contrast.
Digital Input Test Menu
Refer to Section 3.4.19.
Digital Output Test Menu
Refer to Section 3.4.20.
3.4.19 Digital Input Test Menu
Main Menu → Service Menu → Diagnostics Menu → Tests Menu → Digital Input Test Menu
Figure 61 – Digital Input Test Menu Screen
Note: Entering the Digital Inputs Menu will temporarily disable all digital and analog
input/outputs. This will affect logging via these outputs. Exiting the menu restores automatic
control.
Input 0...7
Displays the status of the 0 - 7 digital input pins and their corresponding
pin out on the analog & digital I/O socket (refer to Figure 86). Value will
be 0 or 1.