Ecotech Acoem Serinus 30 - 8. Optional Extras; Dual Sample Filter; Network Port

Serinus® 30 User Manual 3.3
Page 170
8. Optional Extras
This section contains information on optional kits and installed options.
Dual Sample Filter
Refer to Section 8.1.
Network Port
Refer to Section 8.2.
Rack Mount Kit
Refer to Section 8.3.
Internal Pump
Refer to Section 8.4.
Metric Fittings Kit
Refer to Section 8.5.
High Pressure Zero/Span Valves
Refer to Section 8.6.
Trace Level Instrument
Refer to Section 8.7.
External CO
2
sensor
Refer to Section 8.8.
8.1 Dual Sample Filter (PN: E020100)
The dual filter is designed with two sample filters plumbed in parallel with a split line. This formation
allows sample flow not to be affected, yet reduces the loading on each filter and therefore, the
frequency with which they will need to be changed.
The dual filter option is shown in the pneumatic diagram (dashed line) and requires no operational
changes to the instrument (refer to Section 9.5).
Figure 148 – Dual Filter Option Installed
8.2 Network Port (PN: E020101)
The network port option allows the user to setup and connect to a range of TCP/IP network options. If
the user has this option installed they need to make sure it is enabled in the Hardware Menu before
the feature can be used.