Ecotech Acoem Serinus 30 - Main Menu; Figure 44 - Main Menu Screen

Serinus® 30 User Manual 3.3
Page 58
Instrument Gain
This is a multiplication factor which is used to adjust the
concentration measurement to the appropriate level (set by
performing a Span Calibrate CO). This should be recorded after
each calibration in the station log book.
Next Service Due
A field that notifies the user when the next instrument service is
due. This value is editable in the Next Service Due field of the
Advanced Menu (refer to Section 3.4.31). This field is only
displayed in the two weeks prior to the date displayed in this field
or after the date has occurred.
3.4.2 Main Menu
There are six menus on the Main Menu screen.
Figure 44 – Main Menu Screen
Analyser State Menu
Refer to Section 3.4.3.
General Settings Menu
Refer to Section 3.4.8.
Measurement Settings Menu
Refer to Section 3.4.9.
Calibration Menu
Refer to Section 3.4.10.
Service Menu
Refer to Section3.4.13.
Communications Menu
Refer to Section 3.4.22.
Trend Display Menu
Refer to Section 3.4.31.