Ecotech Acoem Serinus 30 - Figure 149 - Separate Rack Slides; Figure 150 - Assemble Inner Slide on Chassis

Serinus® 30 User Manual 3.3
Page 172
2. Refer to Figure 149. Separate the slide rail assembly by pressing the black plastic clips in the slide
rails to remove the inner section of the rail.
Figure 149 – Separate Rack Slides
3. Refer to Figure 150. Attach the inner slide rails to each side of the instrument using M4 x 10 button
screws; three on each side.
Figure 150 – Assemble Inner Slide on Chassis