Ecotech Acoem Serinus 30 - Figure 33 - Replace Nut Loosely; Figure 34 - Insert Tube; Figure 35 - Tighten Nut

Serinus® 30 User Manual 3.3
Page 44
4. Replace the nut loosely, only 2 or 3 threads, on the sample port.
Figure 33 – Replace Nut Loosely
5. Push the tubing into the end of the nut until you hit the tube stop inside the fitting.
Figure 34 – Insert Tube
6. Tighten clockwise until finger tight.
Figure 35 – Tighten Nut