Ecotech Acoem Serinus 30 - Figure 153 - Test Fit the Rack Slide Assembly into the Rack; Figure 154 - Attach Slides to Front of Rack

Serinus® 30 User Manual 3.3
Page 174
6. Test fit the rack slide into the rack to determine the spacing of the rack mount adaptors.
Figure 153 – Test Fit the Rack Slide Assembly into the Rack
7. Refer to Figure 154. Install the two assembled outer slide rails onto the left and right side of the
rack securely with M6 bolts; washer and locknuts/cage nuts.
Figure 154 – Attach Slides to Front of Rack
8. Now carefully insert the instrument into the rack by fitting the instrument slides into the mounted
rails. Ensuring that the rack slide locks engage on each side.