Ecotech Acoem Serinus 30 - Digital Output Test Menu; Calculation Factors Menu; Figure 62 - Digital Output Test Menu Screen; Figure 63 - Calculation Factors Menu Screen

Serinus® 30 User Manual 3.3
Page 76
3.4.20 Digital Output Test Menu
Main Menu → Service Menu → Diagnostics Menu → Tests Menu → Digital Output Test Menu
Figure 62 – Digital Output Test Menu Screen
Note: Entering the Digital Outputs Menu will temporarily disable all digital and analog
input/outputs. This will affect logging via these outputs. Exiting the menu restores automatic
control.
3.4.21 Calculation Factors Menu
Main Menu → Service Menu → Calculation Factors Menu
The Calculation Factors Menu within this menu provide the values used to calculate different aspects
of measurement and calibration.
Figure 63 – Calculation Factors Menu Screen
Automated Test
When started will automatically step through each output, turning
it On and Off.
Output 0...7
Displays the state (On or Off) of the output pin and their
corresponding pin out on the analog & digital I/O socket (refer to
Figure 86), and allows the user to manually set the state.