Ecotech Acoem Serinus 30 - Product Compliance and Approvals

Foreword
Page 17
Product Compliance and Approvals
The Serinus® 30 Carbon Monoxide Analyser, as manufactured by Ecotech Pty Ltd, complies with the
essential requirements of the directives listed below (including CE compliance). The respective
standards have been applied:
Low Voltage Directive (LVD) Directive 2014/35/EU
EN 61010-1:2010
Safety requirements for electrical equipment, for
measurement, control and laboratory use – General
requirements
Electromagnetic Compatibility (EMC) Directive 2014/30/EU
EN 61326-1:2013
Electrical equipment for measurement, control and
laboratory use – EMC requirements – General requirements
Radio Equipment Directive (RED) 2014/53/EU
EN 300 328 V2.1.1
Wideband transmission systems – Data transmission
equipment operating in the 2.4 GHz ISM band and using wide
band modulation techniques
Regulatory Compliance Mark (RCM) – Australia
AS/NZS 4268:2017
Radio equipment and systems – Short range devices – Limits
and methods of measurement
ARPANSA
Radiation Protection Standard
Maximum Exposure Levels to Radiofrequency Fields – 3 kHz -
300 GHz – Radiation Protection Series Publicaiton No. 3: 2002
This analyser is also certified to a number of measurement standards – refer to Section 1.2.8.